Roland XR-640 Guida di Configurazione Scaricare il pdf (Pagina 45)

5. Installing the Ink Cartridges

Pull out the dummy cartridges from slot 1 to 6.

Press

Insert the ink cartridge for each color.

Cleaning the print heads.



Insert the provided hexagon wrench into the hole shown

in the gure below. Rotate it in the direction of arrow until

the buzzer sounds once and hold it with your hand.

The valve will close.

While holding the hexagon wrench with your hand, wait until the

next instruction is displayed.

REMOVE DUMMY CRT.

FILLING INK...

SET SOL CRT.

This operation takes about 5 minutes. During this operation, do not walk away from the machine

and complete this operation by following the on-screen instructions. Walking away before the

operation is completed may cause damage to the print heads, making the machine unusable.

CLOSE THE VALVE

NOW PROCESSING..

Insert into the slot of the

matching color.

Hexagonal wrench

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 59 60

Nessun commento

Roland XR-640 Guida di Configurazione Pagina 45